Self-protecting cored wire D:1.0mm, 4,5kg
On plastic spool S 200 -
Net weight of wire 4,5 kg. Standard designation:
EN 758 AWS A 5.20 T 42 ZZ N 2
E71T-GS Properties and
application area: This
self-protecting flux-cored wire is
preferably used for single-pass welding in
all positions. It is
excellently suitable for thin,
galvanized and galvanized sheets
made of unalloyed steel. The
cored wire electrode has a
stable arc and can be processed on the DC pole with little spatter. The complete
slag coverage results in a
smooth seam pattern. The
cored wire electrode is available in the size
0.9 mm. The
welding parameter range is from 80-200
ampere. This cored wire can be processed very
on small MAG welding devices
which only have a
power of max. 160 amps.
Typical analysis of the weld metal % C Si
Mn PS Al 0 .23 0.4 0.7 0.02 0.01 1.75
Welding positions: PA, PB, PC, PG
Base materials: S 185-S275JR, P
235GH, P265GH S220GD + Z 235GH , P265GH
S220GD + Z - S 550GD + ZF S220GD + ZA -
S550 GD + ZA DX 51 D + ZA - DX 54 D +
ZA Stromart=- Delivery units:
Dimensions: 1, 0 mm coil: S 200
Weight: 4,5 kg Amperages: 80-200
Ampere, 14-24 Volt IMPORTANT INFO:
Self-protecting cored wire -
Arc welding without shielding gas! Also
outdoors! Advantages, especially in comparison to stick electrodes: - Ideal for use outdoors -
Low tendency to spatter - High
melting performance - Less
grinding effort - Less welding time -
Less consumption of filler metal
Dimension: 1.0mm
Minimum Quantity: 1
Content Unit: 1