Climbing protection runner 0529.740

Has 3 catch functions: 1st catch function: In the event of a vertical fall, the 1st catch function catches. 2. Catch function: The device catches the fall backwards (fall-back and sit-back) thanks to an automatic horizontal tension limiter. 3. Catch function: A centrifugal brake triggers a braking impulse at high fall speeds and activates catch function 1. Approved for people up to 150 kg. At 5 kN, the maximum impact force required by EN 353-1 with a 100 kg steel weight is 17% lower. Maximum safety, since the runner can be fully used again after a fall. As a result, an immediate subsequent fall is also secured. The snap hook is equipped with a swivel. Meets the additional requirements of RfU.CNB/P/11.073. Particularly smooth-running, therefore no fatigue and low stress when climbing. Very good running properties thanks to all-round roller guidance and long center distances. Contact with the guide rail is via ball bearing rollers.
Correct insertion into the fall protection rail is guaranteed. The arms are relieved when ascending and descending. Can be used up to 15° on the back and 20° on the side. Also suitable for horizontal fall protection rails. Use: Can be used on all HACA fall protection profiles. For a radius of at least 750 mm. As climbing protection according to DIN EN 353.