Boltless shelving systems with length rails, shelf load 250 kg, RAL 7035 light gray
• Shelf shelving for workshops, warehouses and warehouses
Stock goods can be loaded and removed from both sides.
Suitable for the construction of multi-storey shelving systems.
• Reinforcement with longitudinal ledgers
Increase in bay load possible with additional depth ledgers.
Wide range of accessories, also for subsequent additions.
• All MultiPlus shelves with system perforation
Optimum adaptation to your stored goods thanks to adjustability of the shelves in 25 mm increments.
Easy to assemble by simply plugging in the shelves.
• Safety
Shelves with a height/depth ratio greater than 5:1 must be secured against tipping in accordance with DGUV Rule 108-007 (BGR 234).
Example: a shelf with a depth of 300 mm and a height of 2,000 mm must be secured by wall anchors, foot anchors or head bandages.
The specified loads apply to evenly distributed loads per shelf
Planning information:
Basic shelf: nominal length + 60 mm
Extension shelf: nominal length + 6 mm
Frame depth: nominal depth + 36 mm
Buckling length: designed for 600 mm, larger buckling lengths available on request
Why can shelving with length bars be used on both sides?
Shelves that are reinforced with longitudinal bars can be operated from the front and rear, the cross brace is not required. This makes it easier to access stock items
on particularly deep shelves. INFO: Shelves up to a height of 2,000 mm are braced with 2 pairs of length bars. Shelves up to 3,000 mm receive 3 pairs of length rails.
Load capacity per shelf with an evenly distributed load.
Load capacity per shelf with an evenly distributed load