Roller cabinet 179N-7/ 220 220pc.

Roller cabinet no. 179N-7/220 with 220-piece assortment

Design: Sturdy sheet steel construction, with 7 drawers on one side (5 x 81 2 x 166 mm high) ball-bearing mounted guide rails, full extension, middle and end catches as well as single lock against accidental opening while moving, with automatic retraction . The basic equipment includes a divider in each drawer. The side walls have square perforations, the attachments are protected from damage by indented side walls mounted inside the trolley dimensions. Centrally closed by a cylinder lock. With large, heavy duty non-marking fixed castors (Ø 125 mm), 2 swivel castors (Ø 125 mm), with roll-spinning brake (total stop) for firm footing in all directions. All wheels are equipped with thread protection, which protects the bearings against dirt and threads. Vertical continuous edge protection on all four vehicle sides. Surface scratch resistant powder-coated, body in Hazet blue, drawers in black.

Scope of delivery:
1 tool module screwdriver, 31-piece consisting of:
7 screwdrivers for slotted screws 3.5 4 5.5 6.5 8 10 12 mm
3 screwdriver for cross-head screws PH 1 2 3
10 screwdrivers for TORX® screws T 6 7 8 9 10 15 20 25 27 30
1 screwdriver, short, for slotted screws 5.5 mm
1 screwdriver, short, for cross-head screws PH 2
1 hexagonal offset screwdriver set 9-piece 1.5 2 2.5 3 4 5 6 8 10 mm
1 tool module actuating tools 77-piece consisting of:
1 reversible ratchet 1/4"
12 hexagon socket wrench sockets 1/4" 4 5 5,5 6 7 8 9 10 11 12 13 14 mm
11 hexagon socket wrench sockets, long 1/4" 4 5 5.5 6 7 8 9 10 11 12 13 mm
5 recessed hexagon screwdriver bits 1/4" TiN-coated 3 4 5 6 8 mm
3 slot screwdriver bits 1/4", TiN-coated 3.5 5.5 8 mm
2 Phillips screwdriver bits 1/4", TiN-coated PH 1 2
2 Pozidriv screwdriver bits 1/4", TiN-coated PZ 1 2
1 enlarger 1/4" to 3/8"
1 T-handle with sliding block 1/4"
2 extensions 1/4" 55 147 mm
1 universal joint 1/4"
1 spinner handle 1/4"
1 reversible ratchet 1/2"
17 hexagon socket wrench sockets 1/2" 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 mm
2 hexagon power socket wrench sockets 1/2" 17 19 mm
7 recessed hexagon screwdriver bits 1/2", TiN-coated 5 6 7 8 10 12 14 17 mm
1 enlarger 1/2" to 3/4"
1 reducer 1/2" to 3/8"
1 T-handle with sliding block 1/2"
2 extensions 1/2" 123 248 mm
1 universal extension 1/2" 46 mm
1 universal joint 1/2"
1 tool module spanner, 33-piece, consisting of:
8 open ended spanners 6 x 7 8 x 9 10 x 11 12 x 13 14 x 15 16 x 17 18 x 19 21 x 22 mm
8 double-ended ring spanner 6 x 7 8 x 9 10 x 11 12 x 13 14 x 15 16 x 17 18 x 19 21 x 22 mm
17 combination spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 24 mm
1 tool module hand tools, 17-piece consisting of:
2 hexagon socket wrench screwdrivers 6 7 mm
1 double ring spanner open, 10 x 11 mm
2 flat chisel 150 200 mm
1 centre punch 120 mm
5 pin punches 3 4 5 6 8 mm
1 flat scraper 270 mm
1 plastic soft-faced hammer 40 mm
1 engineer's hammer 600 g
1 Voltmeter 3-48 V
1 tape measure, 5 m
1 caliper brush 225 mm
1 bit set 1/4" 36-piece consisting of:
3 slot 0.6 x 4.5 0.8 x 5.5 1.0 x 6.0 mm
7 Phillips PH 1 (3 pieces) 2 (3 pieces) 3
7 Pozidriv PZ 1 (3 pieces) 2 (3 pieces) 3
4 recessed hexagon 3 4 5 6 mm
1 jobber drill set, 25-piece, Ø 1–13 mm in 0.5 mm increments